如果搜索出来的连接不能用,把连接中间的日期去掉就好了,最近更改了所有连接的名字

编译nginx报错及解决

linux huahua 1343℃

今天在安装nginx时出现如下错误:

[root@node1 nginx-0.8.55]# ./configure \

  –prefix=/usr \
  –sbin-path=/usr/sbin/nginx \
  –conf-path=/etc/nginx/nginx.conf \
  –error-log-path=/var/log/nginx/error.log \
  –pid-path=/var/run/nginx/nginx.pid  \
  –lock-path=/var/lock/nginx.lock \
  –user=nginx \
  –group=nginx \
  –with-http_ssl_module \
  –with-http_flv_module \
  –with-http_gzip_static_module \
  –http-log-path=/var/log/nginx/access.log \
  –http-client-body-temp-path=/var/tmp/nginx/client/ \
  –http-proxy-temp-path=/var/tmp/nginx/proxy/ \
  –http-fastcgi-temp-path=/var/tmp/nginx/fcgi/

./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using –without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using –with-pcre=<path> option.

上面步骤很明显缺少了一个叫pcre的库文件,安装好后并指定路径,我们接着安装。
12 [root@node1 pcre-8.02]# ./configure –prefix=/usr/local/pcre
[root@node1 pcre-8.02]# make && make install

安装正常我们接着安装nginx.
[root@node1 nginx-0.8.55]# ./configure \

  –prefix=/usr \
  –sbin-path=/usr/sbin/nginx \
  –conf-path=/etc/nginx/nginx.conf \
  –error-log-path=/var/log/nginx/error.log \
  –pid-path=/var/run/nginx/nginx.pid  \
  –lock-path=/var/lock/nginx.lock \
  –user=nginx \
  –group=nginx \
  –with-http_ssl_module \
  –with-http_flv_module \
  –with-http_gzip_static_module \
  –http-log-path=/var/log/nginx/access.log \
  –http-client-body-temp-path=/var/tmp/nginx/client/ \
  –http-proxy-temp-path=/var/tmp/nginx/proxy/ \
  –http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ \
  –with-pcre=/usr/local/pcre

当使用make时报了如下错误:

[root@node1 nginx-0.8.55]# make
make -f objs/Makefile
make[1]: Entering directory /nginx/nginx-0.8.55' cd /usr/local/pcre \ && if [ -f Makefile ]; then make distclean; fi \ && CC="gcc" CFLAGS="" \ ./configure --disable-shared /bin/sh: line 2: ./configure: 没有那个文件或目录 make[1]: *** [/usr/local/pcre/Makefile] 错误 127 make[1]: Leaving directory/nginx/nginx-0.8.55′
make: *** [build] 错误 2

通过查阅资料原来检测环境时,不是指向安装后目录,指向pcre的源目录。如下所示即可

[root@node1 nginx-0.8.55]# ./configure \

  –prefix=/usr \
  –sbin-path=/usr/sbin/nginx \
  –conf-path=/etc/nginx/nginx.conf \
  –error-log-path=/var/log/nginx/error.log \
  –pid-path=/var/run/nginx/nginx.pid  \
  –lock-path=/var/lock/nginx.lock \
  –user=nginx \
  –group=nginx \
  –with-http_ssl_module \
  –with-http_flv_module \
  –with-http_gzip_static_module \
  –http-log-path=/var/log/nginx/access.log \
  –http-client-body-temp-path=/var/tmp/nginx/client/ \
  –http-proxy-temp-path=/var/tmp/nginx/proxy/ \
  –http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ \
  –with-pcre=/usr/local/pcre-8.02
[root@node1 nginx-0.8.55]# make && make install

OK!安装成功

转载请注明:EZLOST » 编译nginx报错及解决

喜欢 (0)